L Series Linear Valve Actuators

The L Series Actuators provide a safe, long lasting, low friction, stainless steel substitute for diaphragm types in a smaller package for resistance to corrosion and vibration.

QTRCO L Series Linear Valve Actuators

L Series - Fully Automated Linear

Fail Up, Fail Down Or Double Acting

Output Thrust 46,000 lbf (204,618 N)

Temperature Range -76ºF to 500ºF

Pressure 150 psig (10.3 bar)

Strokes to 4” (102 mm)

L Series Linear Valve Actuator Overview

Using captured springs and the linear components of our rotary, our L Series Actuators provide a safe, long lasting, low friction, stainless steel substitute for diaphragm types in a smaller package for resistance to corrosion and vibration.

True Spring Return Or Double Acting Linear Actuation​

Can be mounted to globe, gate, diaphragm, or any other type of linear action valve. QTRCO linear actuators provide a safe, long lasting, alternative for diaphragm actuators in a smaller package

Compact Construction

As much as 50% smaller than spring & Diaphragm actuators​

QTRCO Linear Actuator

Piston Diameters from 2 to 24 inches.​

DA strokes unlimited, SR strokes to 24".​​

Piston axis aligns with the pinion gear pitch circle diameter, eliminating the cantilever forces inherent in rack and pinion type actuators. Low friction rollers maintain correct engagement of the stainless steel gearing for absolutely exceptional cycle life.

The reduced friction enables outstanding throttling control as demonstrated in numerous 'typical diaphragm actuator' applications where corrosion or high vibration dictated a better solution.

Q Series

Q Series

Offset cylinders align the piston axis with the pinion gear pitch circle diameter, eliminating the cantilever forces inherent in rack and pinion type actuators. Low friction rollers maintain correct engagement of the stainless steel gearing for absolutely exceptional cycle life.

The reduced friction enables outstanding throttling control as demonstrated in numerous 'typical diaphragm actuator' applications where corrosion or high vibration dictated a better solution

QTROC F SERIES Actuators

F Series

A unique slotted body concept absorbs 100% of the yoke mechanism's side loading forces leaving the piston rod completely free of bending stresses while allowing termination of the rod at the yoke, and the addition of a weight and force balancing second force module diagonally offset from the first. The balanced weight makes lifting and handling of the actuators safer and easier, while reducing valve neck stress caused by unbalanced scotch yoke actuators. Internally, the balanced forces assure less friction loss and less wear as there is no net force applied to the shaft bushings.

T Series

T Series

The T-Series actuator demonstrates how we are committed to making life easier. An OEM of over the road bulk carriers was impressed by the capabilities of our Rack & Gear® actuators and they appreciated our ability to mount to numerous valves simply by selecting the proper adapters and mounting plate.

L Series

L Series

Using captured springs and the linear components of our rotary, our L Series Actuators provide a safe, long lasting, low friction, stainless steel substitute for diaphragm types in a smaller package for resistance to corrosion and vibration.

XRCISER®

XRCISER®

The standard QTRCO actuator uses a travel stop screw in the end cap to limit outward travel of the actuator piston, and therefore valve travel. In the XRCISER® configuration the pneumatically engaged tandem pistons become the outward travel stop. By confirming tandem piston pressure and position; spurious valve travel is prevented during the partial stroke cycle.​

Accessories

Accessories

A wide range of valve actuator accessories make your valve actuator more useful and versatile.